Blaster Modules and Key Parts: Star Wars Outlaws Guide

Adrian by Adrian|

This guide will show you when you unlock each of the main Blaster Modes and their sub-variants in Star Wars Outlaws. We will also explain where and how to get the Blaster Key Parts and other rare materials required for the upgrades.

Why you should upgrade your blaster

Kay’s blaster is your main weapon in the game. Nix has a ton of uses and no one can’t deny that he’s the star of the game but not even he can defeat legions of Stormtroopers.

While the majority of enemies don’t represent a threat individually, you can still be overwhelmed by multiple enemies or tougher opponents like Droids, Gamorreans, and Death Troopers.

The blaster pistol has three modules: Plasma, Ion, and Power. These modules with their respective configurations provide a way to deal with any situation the game presents while also allowing players with options for different playstyles.

PlasmaIonPower
Star-Wars-Outlaws-Plasma-Blaster-Module-IconStar-Wars-Outlaws-Ion-Blaster-Module-IconStar-Wars-Outlaws-Power-Blaster-Module-Icon
Plasma-Light-Mode-IconPlasma-Rapid-Mode-IconPlasma-Heavy-Mode-IconIon-Burst-Mode-IconIon-Blaster-Surge-IconPower-Bolt-Mode-IconPower-Blast-Mode-IconPower-Pulse-Mode-Icon
Blaster Menu Screen in Star Wars Outlaws

The following segments explain what you get with each upgrade, the requirements, and how to obtain the unique items that are needed for it.

Plasma Module

Star-Wars-Outlaws-Plasma-Blaster-Module-Icon

The Plasma Module is available from the get-go. It is going to be your most used module, and it is worth exploring its available upgrades to see what and where you should obtain as soon as possible.

Light Configuration

Plasma-Light-Mode-Icon

A standard Blaster Module configuration that fires plasma bolts. Unlocked right at the beginning of the game.

UPGRADE 1:
Improved Accuracy

Requirements:
– 5x Transparisteel
– 2x Ray Accelerator

UPGRADE 2:
Adds a new window of opportunity during cooling that, when properly timed, Supercools the blaster, temporarily preventing heat buildup

Requirements:
Blaster Recirculator
– 10x Polycarbonate
– 4x Actuating Module

UPGRADE 3:
Increases the damage dealt with each fired shot

Requirements:
– BT-009S Fastshot Trigger
– 15x Slivian Iron
– MG-2 Power Exceeders

Where to get the BT-009S Fastshot Trigger Blaster Key Part

The BT-009S Fastshot Trigger is located inside a cave in The Lost Steppe on Toshara. Climb to the top of Typhon’s Rock where you’ll find a tunnel.

Navigate the tunnel until you find the big container with the BT-009S Fastshot Trigger inside. You’ll need the Power module to destroy rocks blocking the path.

Rapid Configuration

Plasma-Rapid-Mode-Icon

A makeshift Blaster Module configuration that fires lighter plasma bolts at a higher rate of fire. It becomes available after completing the main quest The Wreck.

UPGRADE 1:
The blaster can fire more shots before overheating

Requirements:
Blaster Recirculator
– 10x Chalcopyrite
– 4x Cryo-Coils

UPGRADE 2:
Improves accuracy of the blaster

Requirements:
Blaster Recirculator
– 15x Transparisteel
– 1x MG-2 Power Exceeder

UPGRADE 3:
Adds a new window of opportunity during cooling that, when properly timed, Supercools the blaster, temporarily preventing heat buildup

Requirements:
– Gas Acceleration Converter
– 20x Polycarbonate
– 10x Actuating Module

Where to get the Gas Acceleration Converter Blaster Key Part

The Gas Acceleration Converter is sold by Viska, the Ashiga Armorer located in the Ashiga Clan territory, on Kijimi.

In order to have access to this purchase you must have an excellent reputation with the Ashiga Clan. The Gas Acceleration Converter costs 1300 credits.

Heavy Configuration

Plasma-Heavy-Mode-Icon

A makeshift Blaster Module configuration that fires heavier plasma bolts at a slower rate of fire. This configuration is available after unlocking the Plan B ability from The High Roller expert.

UPGRADE 1:
Adds a new window of opportunity during cooling that, when properly timed, Supercools the blaster, temporarily preventing heat buildup

Requirements:
Blaster Recirculator
– 10x Polycarbonate
– 4x Actuating Module

UPGRADE 2:
Reduces the time between shots

Requirements:
Blaster Recirculator
– 15x Transparisteel
– 7x Cryo-Coils

UPGRADE 3:
Increases the damage dealt with each fired shot

Requirements:
– Actuating Diffuser Module
– 20x Slivian Iron
– 10x Ray Accelerator

Where to get the Actuating Diffuser Module Blaster Key Part

The Actuating Diffuser Module is an item sold exclusively by Namda Eaakee, a Rodian merchant located in The Great Basin, on the far East side of Akiva.

To gain access to this area you must have the Hydrorepulsor speeder upgrade. The price for this valuable item is 1500 credits and 10x Direct-Energy Circuit.

Ion Module

Star-Wars-Outlaws-Ion-Blaster-Module-Icon

You can get the Ion Module after stealing it on the quest New Tricks. The Ion Blaster module is helpful against Droids. It also works great against opponents using shields. or heavy canons with shields.

Burst Configuration

Ion-Burst-Mode-Icon

A standard Ion Module configuration that fires ionized particles. Effective against shields and droids.

UPGRADE 1:
Improved Accuracy

Requirements:
– 5x Transparisteel
– 2x Ion Cell

UPGRADE 2:
Adds a new window of opportunity during cooling that, when properly timed, Supercools the blaster, temporarily preventing heat buildup

Requirements:
Blaster Recirculator
– 10x Polycarbonate
– 4x Actuating Module

UPGRADE 3:
Increases the damage dealt with each fired shot

Requirements:
HD05-G Circuit
– 15x Slivian Iron, Ion Cells

Where to get the HD05-G Circuit Blaster Key Part

Tthe process to get the HD05-G Circuit involves getting access to a Smuggler’s Hideout located west of Shipjacker Workshop.

The Speed Boost ability is the only requirement to access this area. Check our full HD05-G Circuit walkthrough for more detailed information.

Surge Configuration

Ion-Blaster-Surge-Icon

A makeshift Ion Module configuration with a short-range ion surge that is powerful against shields and droids. You get the Surge Ion Kit after completing the main quest Viper.

UPGRADE 1:
Reduces the time between shots

Requirements:
Blaster Recirculator
– 10x Chalpoyrite
– 4x Ray Accelerator

UPGRADE 2:
The blaster can fire more shots before overheating

Requirements:
Blaster Recirculator
– 15x Chalcopyrite
– 7x Cryo-Coils

UPGRADE 3:
The power in the blast is increased, increasing its overall range

Requirements:
– BT-P7 Ion Accelerator
– 20x Transparisteel
– 10x Ion Cell

Where to get the BT-P7 Ion Accelerator Blaster Key Part

Entip, one of the Jawa Traders will trade the BT-P7 Ion Accelerator for a Fusion Engine Core and 2000 credits. You can find Entip on the Sandcrawler in various different places. He is a traveling merchant. Below we are listing two common and easy to get to locations where you can find him often.

Shock Configuration

Supercharged ionized plasma with an unstable core. Discharges a powerful shockwave on impack. You get the Ion Shock Kit from Hondo Ohnaka after completing Brave the Unknown of A Pirate’s Fortune DLC.

UPGRADE 1:
The blaster can fire more shots before overheating.

Requirements:
Blaster Recirculator
– 7x Actuating Module
– 7x Refined Roxodium Plating

UPGRADE 2:
The blaster can fire more shots before overheating

Requirements:
Blaster Recirculator
– 10x Ion Cell
– 10x Refined Roxodium Plating

UPGRADE 3:
The power in the blast is increased, increasing its overall range

Requirements:
– P421 Ion Actuator
– 15x Ray Accelerator
– 15x Refined Roxodium Plating

Power Module

Star-Wars-Outlaws-Power-Blaster-Module-Icon

This Module becomes available after completing The Safecracker, The Heavy, or The Droidsmith. ND-5 says that he found something in the ship inventory that you could use. Join him in the Trailblazer to receive the Power Module.

Bolt Configuration

Power-Bolt-Mode-Icon

A standard Power Module configuration that chargues up before firing a bolt that explodes on impact. You unlock this one automatically when you get the Power Module.

UPGRADE 1:
Adds a new window of opportunity during cooling that, when properly timed, Supercools the blaster, temporarily preventing heat buildup

Requirements:
Blaster Recirculator
– 10x Polycarbonate
– 4x Actuating Module

UPGRADE 2:
Reduces the time required to charge the weapon to maximum power

Requirements:
Blaster Recirculator
– 15x Chalcopyrite
– 7x Cryo-Coils

UPGRADE 3:
Increases the damage dealt with each fired shot

Requirements:
BT-2X Charge Controller
– 20x Durasteel
– 10x MG-2 Power Exceeder

Where to get the BT-2X Charge Controller Blaster Key Part

To get the BT-2X Charge Controller you must go to the Seeker’s Peril, a location in the South Jundland Wastes on Tatooine.

This area is surrounded by mountains and ridges. After solving a puzzle you get access to a Slicer’s Shelter, where the BT-2X Charge Controller is located. Our full Seeker’s Peril walkthrough goes into more details.

Blast Configuration

Power-Blast-Mode-Icon

A makeshift Power Module configuration that fires a heavy plasma bolt that detonates on impact. You unlock it after completing the main quest The Hive.

UPGRADE 1:
Reduces the time required to charge the weapon to maximum power

Requirements:
Blaster Recirculator
– 10x Charlcopyrite
– 4x Cryo-Coil

UPGRADE 2:
The shot is discharged at a higher velocity, increasing its effective range

Requirements:
Blaster Recirculator
– 15x Transparisteel
– 7x Ray Accelerator

UPGRADE 3:
Increases the damage area of the blast as it detonates

Requirements:
– Particle Stability Converter
– 20x Slivian Iron
– 10x Actuating Module

Where to get the Particle Stability Converter Blaster Key Part

The Particle Stability Converter is only sold by a Pyke Armorer located at the Pyke Crystal Mine on Akiva, west of Myrra Valley to be precise.

This is a faction vendor, meaning that you’ll only be able to purchase this item by having an excellent reputation with the Pyke Syndicate. The Particle Stability Converter costs 1300 credits.

Pulse Configuration

Power-Pulse-Mode-Icon

A makeshift Power Module configuration that causes the blaster bolt to power more powerful the longer it’s charged. It becomes available after completing the main quest Legacy.

UPGRADE 1:
Increases speed and efficiency of the blaster’s passive cooling system

Requirements:
Blaster Recirculator
– 15x Polycarbonate
– 7x Cryo-Coil

UPGRADE 2:
Reduces the time required to charge the weapon to maximum power

Requirements:
Blaster Recirculator
– 20x Slivian Iron
– 12x MG-2 Power Exceeder

UPGRADE 3:
Further increases damage dealt when firing the blaster at full charge

Requirements:
Trans-Accelerator
– 20x Chalcopyrite
– 15x Cryo-Coil

Where to find the Trans-Accelerator Blaster Key Part

The Trans-Accelerator can be found southwest of Hunter’s Canopy. To reach this area you must have the Hydrorepulsor for Kay’s speeder. After solving the Bolthead Door Puzzle, you will be able to loot the treasure chest cointaining the key part.

Related Star Wars Outlaws Collections of Guides

Our Guides Master List for Star Wars Outlaws is a great starting point. In it you will find all of our guides and walkthroughs ordered in categories.

Adrian

Adrian

Studied psychology at his state University. The first game that left him speechless was Star Wars: Knights of the Old Republic. Star Wars is his favorite franchise, but LOTR is right under it. He also loves music, particularly guitar and all the related gear to it.
Subscribe
Notify of
guest
0 Comments
Newest
Oldest Most Voted
Inline Feedbacks
View all comments

We respect your privacy. Your email address will never be shared or sold.